Will a new rooflight or skylight be warmer?
Substantially, if what you have is more than about twenty years old. Sealed unit technology has moved a long way, and the difference between an early double glazed rooflight and a current one is large enough to change how a room feels in January. What a new unit will not fix is a cold kerb, and that is usually doing more damage than the glass.
Where the improvement comes from
Four things, and they compound.
A low emissivity coating, an inert gas fill, a warm edge spacer and a thermally broken frame each improve the figure, and a modern unit has all four where an old one had none.
The low emissivity coating
The single largest step.
A microscopically thin coating on one internal face reflects heat back into the room rather than letting it radiate out through the glass.
It is invisible and it is the biggest difference between a nineties unit and a current one.
The gas fill
A smaller and real improvement.
Argon in the cavity conducts less heat than air, and it is standard now where an older unit had plain air between the panes.
Whether it stays there is on does argon leak out of a sealed unit.
The warm edge spacer
Where the cold corners come from.
An old aluminium spacer conducts heat straight around the edge of the unit, and a modern low conductivity spacer does not, which shows as warmer glass at the perimeter.
What one is is on what is a warm edge spacer.
Why the edge matters so much
Because that is where condensation starts.
The coldest part of a glazed unit is its perimeter, so improving the spacer moves the point at which a room starts producing water on the glass.
The frame
A larger share of the loss than people expect.
A thermally broken frame has an insulating barrier between its inside and outside faces, and an old unbroken aluminium frame is a continuous path for heat.

What a single glazed or dome unit gives you
The largest step of all.
Replacing an old polycarbonate dome or a single glazed rooflight with a modern sealed unit is a transformation rather than an improvement.
That case is on can a dome rooflight be replaced with glass.
What triple glazing adds
Something, and it is not always the right buy.
A third pane improves the figure and adds weight, and on a rooflight the frame and the kerb are often the limiting elements rather than the glass.
The argument is on is triple glazing worth it in a rooflight.
What the regulations require
A limiting figure for a replacement.
A new rooflight has to meet a stated performance even in an existing opening, so a replacement cannot simply match a poor original.
The figure is on what is the limiting U value for a replacement rooflight.
Reading the figure honestly
Whole unit rather than centre pane. A glass only figure flatters every product, and the number that describes what your room will feel is for the assembled unit at the size being bought.
What to look for is on what U value should a rooflight have.
What it will not fix: the kerb
The point of this page. An uninsulated upstand is a continuous cold ring around the whole perimeter, and it loses more than the difference between two glazing specifications.
What it should be is on what is a builders kerb.
Why that is the priority
Because it is free while the unit is off.
Insulating a kerb during a replacement takes very little time and money, and it deals permanently with the cold line and the winter condensation.

What it will not fix: condensation from the room
Reduced rather than eliminated. A warmer inner pane means the room has to be more humid before water forms, which genuinely helps, and a very humid room will still produce it.
What does fix it is on how do I stop condensation on a rooflight.
What it will not fix: a cold room generally
Worth being clear. A rooflight is one element in an envelope, and where a room is cold because of an uninsulated flat roof, a better pane is a small part of the answer.
The comfort difference
Larger than the numbers suggest. A warmer inner surface stops drawing heat from people beneath it by radiation, so a room feels warmer at the same air temperature.
The summer side
Worth deciding at the same time. A new clear unit admits far more solar energy than a yellowed old one did, so a south facing room can become hot when it never was.
What to specify is on what is solar control glass.
What it does to running costs
A modest and real reduction. A rooflight is a small part of a heat loss calculation, so the honest claim is a contribution rather than a transformation of a heating bill.
What it does to an EPC
Very little on its own.
A single element rarely moves a rating, and it counts alongside insulation, heating and everything else.
That is on does a rooflight affect an EPC.
What we insulate on a replacement
We insulate the kerb and splay the reveal on every replacement and we say so in the quotation, because a better pane in an unchanged cold reveal delivers a fraction of what the homeowner was expecting.
The whole picture is on the replacing a failed or misted rooflight page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.