Energy Efficient Rooflights

How do I stop condensation on a rooflight?

Water on the room side of a rooflight is condensation out of the air in the room onto the coldest surface in it, which is what a rooflight is. It is not a leak and it is not a failed unit. It is reduced by lowering the humidity, raising the surface temperature, improving the ventilation, and fixing the insulation at the frame.

First, which side is the water on

The test that separates a room problem from a product failure, and it takes a finger.

Water on the room side wipes off. Misting between the panes cannot be wiped, because it is inside a sealed unit, and that is a failed seal and a replacement.

Water outside on a cold morning is dew on a well performing unit and clears with the sun.

Second, when does it appear

The other diagnostic, and it separates condensation from ingress.

Water that appears on cold mornings, particularly after cooking or bathing, is condensation. Water that appears during or after rain, and only then, is ingress and is a different job.

A fortnight of noting the date and the weather answers it more reliably than an inspection.

Why the rooflight or skylight and not the walls

Because it is the coldest surface in the room.

Air holds a certain amount of moisture at a given temperature, and when it touches a surface below its dew point that moisture condenses out. The coldest surface goes first.

The rooflight is not causing the humidity. It is revealing it.

Where it appears first

Along the frame perimeter rather than in the middle of the glass.

Modern glazing outperforms most frames, so the frame is colder, and where insulation stops short at the reveal the line around the opening is colder still.

Condensation in a neat line around a frame is telling you where the heat is escaping.

The first remedy: reduce the humidity

Where the moisture is coming from rather than where it lands.

Cooking, bathing, drying washing indoors and unvented tumble driers all put large amounts of water into the air. A single bath can put a surprising quantity into a small house.

Extract at source, used at the time, does more than anything else on this list.

A cutaway section of a triple glazed rooflight unit showing the two cavities, the warm edge spacers and the thickness of the laminated inner pane
The second: ventilate

The second: ventilate

Moving humid air out rather than treating the symptom.

Background ventilation running continuously, and an opening rooflight or window used after a shower or a meal, remove moisture before it can condense.

An opening rooflight at the highest point of a room is the most effective vent position available.

The third: raise the surface temperature

Which is a specification and installation question.

Better glazing, a frame with a genuine thermal break, and above all insulation carried right up to the frame with the vapour control layer sealed to it.

That last is what turns a line of water around a frame into no water at all.

The fourth: keep air moving over the glass

The one nobody thinks of, and it is why blinds matter.

A closed blind isolates the glass from the room, which makes the glass colder and lets moisture sit on it undisturbed.

Opening a blind for part of the day in a humid room lets air move over the glass and clears it.

Kitchens

The room where this is most common and most manageable.

Large quantities of moisture, a cold surface overhead, and frequently an extract that is undersized or never used.

An extract over the hob used while cooking, and an opening rooflight, together resolve most kitchen complaints.

Bathrooms

The other case, and here the extract is a requirement rather than a preference.

A shower puts a great deal of water into a small room in minutes, and the rooflight is at the highest point where that vapour goes.

An extract that runs on after the room is used is what prevents it.

Strong overhead sunlight through a solar control coated rooflight falling onto a plain pale kitchen floor, the faint neutral tint of the coating visible in the glass
Bedrooms in a loft

Bedrooms in a loft

The quieter case that surprises people. Two people asleep in a room overnight produce a significant quantity of moisture, and a loft bedroom under a rooflight is a small volume with a cold surface.

Trickle ventilation left open, rather than closed for warmth, is the usual answer.

New buildings and new plaster

A temporary cause worth ruling out before treating anything.

A newly plastered ceiling, a new extension or recent building work releases a large amount of construction moisture for the first season.

Condensation in the first winter that never returns is that, and it is not a fault.

External condensation

The opposite phenomenon, and it means the unit is working well.

A very well insulated unit keeps so little heat on its outer pane that dew forms on the outside on a clear morning, obscuring the view until the sun clears it.

It is a sign of good performance rather than a problem, and it is worth knowing before it happens.

What is actually a fault

Two things, and both are clear-cut. Misting between the panes, which is a failed seal. And water appearing during rain, which is ingress at the flashing or the upstand.

Neither is fixed by ventilation, and both are jobs rather than habits.

Condensation in the roof space

A different problem that presents similarly and needs a different remedy.

Where a stain appears on a ceiling around a frame rather than water on the glass, the moisture is in the roof space rather than the room, and the answer is eaves ventilation.

What we carry

We carry insulation to the frame and seal the vapour control layer to it as standard, ask what the room is used for before specifying, and check whether an old unit was providing the room’s background ventilation.

The whole picture is on the energy efficient rooflights page.

Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.

Get a fixed quote

Get a fixed quote

Tell us about the roof. We will tell you the price.

A survey costs you nothing and there is no obligation attached to it. We look at the roof build-up, the exposure and the opening, and give you one fixed figure, not an estimate that moves once work starts.

If your rooflight is leaking now, say so and we will prioritise the survey.

  • Fixed price, confirmed in writing
  • 10-year workmanship guarantee
  • Installed to current Building Regulations
  • Your roof is never left open overnight
Call Get a fixed quote