Very often, and it is the first thing worth establishing. Seals, springs, friction pads, handles, hinges, ventilation filters and sealed units are all available as service parts for units still identifiable from the plate. A window that is draughty, stiff, misted or hard to close is usually a parts job rather than a replacement.
Whether a misted unit can be repaired generally
The general position, and what a failed sealed unit actually is, is on can a misted rooflight be repaired.
What this page adds is which parts exist for a branded roof window and how they are ordered.
How a part is identified
From the plate, every time.
The type designation, the size code and the year of manufacture together identify the exact component, and a photograph of the plate is what a supplier actually needs.
Finding it is on how do I find my VELUX size code.
The sash seal
The commonest repair and the cheapest. A gasket that has taken a set stops sealing evenly, which shows as a draught, a whistle in wind or a line of condensation at one corner.
It pulls out and a new one goes in without disturbing the roof.
Springs
What to change when a sash will not stay put.
The springs balance the sash so it holds where it is left, and when they weaken the window creeps shut or becomes heavy to open.
They are replaceable in pairs and it is a bench job on the sash rather than roof work.
Friction pads and hinges
The other half of how a sash feels.
Worn pads let a sash move too freely or bind against the frame, and on a centre pivot the pivot hinges themselves are a wearing item.
Both are available and both are fitted from inside.

Handles and latches
Straightforward, and often a homeowner job. A ventilation bar handle used daily for decades goes loose or stiff, and a new one is ordered against the range and fitted with a screwdriver.
The ventilation filter
Not a repair so much as maintenance nobody knows about.
A filter behind the trickle vent clogs with dust and, near the coast, with salt, and a clogged one makes a bedroom feel stuffy overnight.
It pulls out, rinses and goes back.
The sealed unit
The larger repair, and it is still a repair.
Where a pane has misted, the sealed unit alone can be replaced in the existing sash on ranges where that part is available, leaving the frame, the flashing and the reveal untouched.
The route is on can just the glass be replaced.
A whole sash
Between a pane and a window. Where a sash is damaged or its timber has suffered, a complete replacement sash for the code drops into the existing frame, which is faster and less disruptive than a full replacement.
What cannot be repaired
A frame that has rotted. Where water has been getting into the frame timber over years, there is no part to fit, and the window and often the timbers around it are replaced.
What that involves is on what happens if the timber underneath has rotted.
Where the fault is the flashing
Common, and it is not a window repair at all.
Water at the head of a window is usually the flashing or the underlay collar rather than the unit, and replacing a perfectly good window will not stop it.
Diagnosis first is on why is water coming in around my rooflight.
Where the fault is the reveal
The other misdiagnosis.
Mould or wet plaster around a window in a bathroom or a bedroom is usually cold plaster rather than a failed window, and the fix is insulation rather than a new unit.

When replacement is the better call
Where the thermal step is the point.
A very old unit repaired is still a very old unit thermally, and where a room is cold the money often does more as a new window than as a set of parts.
The comparison is on will a new rooflight be warmer.
Where a range is no longer supported
The limit of the repair route.
Very old units from discontinued ranges may have no parts at all, in which case a like for like replacement into the same opening is generally straightforward.
Which is on can a VELUX be replaced like for like.
What a repair visit involves
Usually no roof work at all.
Seals, springs, pads, handles and filters are all reached from inside the room with the sash swung, so there is no scaffold, no covering lifted and no weather risk.
It is the reason a repair is a fraction of the cost of a replacement rather than a slightly smaller version of it.
Doing several parts at once
Sensible on an older window.
A unit old enough to want a seal is usually old enough to want springs and a filter as well, and doing them together is one visit rather than three.
What to check before calling anybody
Two things, and either may be the whole answer.
Clear the drainage channels at the sill, and check the ventilation flap is not clogged. A surprising number of draught and damp complaints resolve there.
What we want to know on a VELUX
We ask for a photograph of the plate before quoting anything, because a good proportion of the enquiries we get about replacing a window turn out to be a seal, a spring or a pane.
The rest is on the VELUX window installation page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.