The coating has broken down at the surface. Ultraviolet light degrades the binder in a paint or powder coat over years, leaving the pigment loose on the surface as a fine powder that comes off on your hand. On a Sussex coastal roof salt accelerates it. It is a finish problem rather than a structural one, though it is worth understanding what it is telling you.
What chalking is
The binder failing, not the metal.
A coating is pigment held in a binder, and ultraviolet breaks the binder down at the exposed surface, releasing pigment as a powder while the layer beneath is still intact.
Why a roof gets it first
Because of the exposure.
A frame on a roof faces the sky directly and takes far more ultraviolet than a wall frame does, so it ages at a different rate on the same house.
Why the sea makes it worse
Salt is aggressive and it stays.
Airborne salt settles on a surface and is not always washed off, and it works on a coating and on any exposed metal beneath it.
What that means for a specification is on marine grade coatings against standard powder coat.
Whether it matters structurally
Usually not, at first.
A chalked surface with sound coating underneath is an appearance issue, and the frame is doing everything it was doing before.
When it does matter
When it has gone further.
Once the coating has broken through to the metal, aluminium starts to corrode at the surface and steel starts to rust, and that is a different conversation.
How to tell how far it has gone
Wipe it and look.
Powder on a cloth with an even coloured surface underneath is chalking. Patchy dull areas, white bloom on aluminium or brown streaks are corrosion.
Pitting on aluminium
What corrosion looks like on this metal.
Aluminium does not rust, it pits, showing as small white or grey spots that spread, and near the sea it appears where the coating has failed.

On a uPVC frame
A different mechanism, similar appearance.
White plastic chalks and yellows under ultraviolet as its surface degrades, and on an old dome rooflight kerb that is often what has happened.
On a painted timber frame
Chalking is the warning stage.
Paint on timber chalks before it cracks and lifts, and dealing with it at the chalking stage is a wash and a coat rather than a strip.
Can it be washed off
The loose powder, yes. Washing with warm water and a mild detergent removes the chalk and restores much of the colour temporarily, and it will chalk again.
Can it be polished
Sometimes, with care.
A very mild automotive style restorer can bring some depth back on a lightly chalked coating, and it removes a little of the remaining coating each time.
Can it be recoated on site
Possible and rarely as good. An aluminium frame can be prepared and coated in place, and it is a different product from a factory applied finish and will not last as well.
When it is worth doing anyway
Where the rooflight is otherwise sound. A good unit with a tired finish and years of life left in it is a reasonable candidate for an on site coating rather than a replacement.
What it tells you about age
Something useful. Visible chalking generally means a coating that has been up for a long time, which is worth knowing alongside the state of the sealed unit.
How long they last is on how long do rooflights last.
Whether to replace instead
The question worth asking at the same time.
A frame that has chalked has usually been up long enough that the sealed unit is near the end of its life too, and doing both at once is one visit.

What the failure often comes with
Tired gaskets and stiff mechanisms. The same years that chalked the coating have compressed the seals and worn any moving parts, so a chalky frame rarely arrives alone.
Preventing it on a new one
Specification rather than maintenance. A marine grade coating specification with the right pre treatment is what keeps a finish sound within a few miles of the sea, and it is a small step at order.
What maintenance actually helps
Rinsing, more than anything. Washing salt and grime off a frame two or three times a year does more for a coastal coating than any treatment applied to it.
Where it shows worst
Dark colours on a south west elevation.
An anthracite frame facing the prevailing weather shows chalking far more readily than a white one in a sheltered position.
What to choose is on what colour should a roof lantern frame be.
Cleaning a chalked frame safely
Gently, and not with anything abrasive.
Warm water, a mild detergent and a soft cloth removes the loose powder. A scouring pad or a strong solvent takes away the coating that is still doing its job.
What a pressure washer does to it
More harm than good, quickly. High pressure strips a weakened coating faster than weather does and drives water past gaskets that were sealing perfectly well.
It is worth keeping one away from a rooflight entirely.
What a surveyor makes of it
A note rather than a defect, usually.
Chalking on a rooflight frame reads as an ageing external finish, and it is the kind of observation that prompts a buyer to ask how old the units are.
What we look at on a replacement
We look at whether the coating has broken through rather than only chalked, because a chalked frame can have years left and a corroded one is telling you the rooflight is finished.
The whole picture is on the replacing a failed or misted rooflight page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.