Does a rooflight or skylight lose more heat than a window?
Generally yes, for the same area and the same glass. A rooflight faces the open sky rather than the ground and surrounding buildings, which is colder at night, and it sits above the warmest air in a room. Both work against it. The difference is real and it is smaller than the difference a good or poor installation makes.
The night sky
The first reason, and it is the one people have not heard.
Any surface loses heat by radiating to what it faces. A vertical window faces the ground, hedges, and other buildings, all of which are close to air temperature.
A roof faces the open sky, which on a clear night is effectively far colder than the air. Glass facing it radiates to that, and cools further than a wall window does.
Why frost forms on a rooflight first
The visible consequence of the same effect.
On a clear still night a rooflight will frost over while the windows below stay clear, and it is the same mechanism that frosts a car roof and not its doors.
It is not evidence of a poor unit. It is evidence of what the glass is facing.
Warm air sits at the top
The second reason, and it is simple.
Warm air rises, so the air in contact with a rooflight is the warmest in the room and the air at a window sill is the coolest.
Heat loss is driven by the temperature difference across the unit, so the same glass at ceiling level is working against a bigger difference.
The frame proportion
A third factor that follows from size rather than position.
Rooflights are generally smaller than windows, so the frame is a larger proportion of the whole unit, and the frame is the weaker part.
Which is why a slim framed rooflight can outperform a bulkier one carrying the same glass.

How the difference is expressed
In the U-value, and it is worth knowing the numbers are not directly comparable.
A rooflight U-value may be declared in the horizontal plane or converted to the vertical, and a window figure is a vertical one.
Comparing a horizontal rooflight figure with a window figure understates the rooflight. The basis is on what U-value should a rooflight have.
What the regulations expect of each
Different limits, drawn from the same reality.
The limiting standard for a replacement window is tighter than for a replacement rooflight, precisely because a rooflight is harder to make perform.
Both are floors that current products clear, and the detail is on the limiting U-value for a replacement rooflight.
The other side of the comparison
Worth putting alongside it, because loss is only half the story.
A rooflight admits considerably more daylight than a window of the same area, because it faces the whole sky rather than a slice of it.
So it loses more heat per square metre and delivers more light per square metre, and a smaller rooflight frequently does the job of a larger window.
Which means less area for the same light
The practical consequence, and it partly cancels the loss.
Where a room needs a given amount of daylight, the rooflight that delivers it is smaller than the window that would, so the total loss is not as different as the per square metre figure suggests.
Winter solar gain
Also better on a roof, for the same reason.
A roof slope takes winter sun at a better angle than a north or east facing wall does, so the gain offsetting the loss is larger on a rooflight than on a comparable window.
What actually decides the total
Not the position, on a domestic installation.
The insulation at the reveal, the continuity of the air barrier at the frame, and whether the old installation was leaking are all larger numbers than the roof-against-wall difference.

Where it is felt rather than measured
The practical version of the same physics.
A cold surface overhead is felt more than a cold surface beside you, because a person radiates upward to it. A rooflight can make a room feel cool at a temperature the thermostat is happy with.
That is on is a rooflight colder than a ceiling.
Condensation follows the same rule
And it is the commonest complaint after an installation.
Because a rooflight is the coldest surface in a room, it is where water forms first on a humid morning. It is a room humidity issue rather than a fault.
The remedies are on how do I stop condensation on a rooflight.
Whether triple glazing closes the gap
Partly, and it brings its own problems on a roof.
A third pane improves the figure and adds weight and thickness, both of which matter more overhead than in a wall.
The decision is on is triple glazing worth it in a rooflight.
Whether it should change what you do
Rarely, and it should change how it is installed.
Nobody should decline a rooflight over the difference. Everybody should insist on insulation carried to the frame and a sealed vapour control layer, because that is where the number that matters lives.
What the quotation shows on the glazing
We quote whole unit figures on a comparable basis, specify by aspect, and detail the frame junction properly, because on a domestic rooflight that junction is worth more than the choice between two good units.
The wider picture is on the energy efficient rooflights page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.