Yes. Even a good rooflight has an inner surface several degrees colder than the plasterboard around it, because glass performs several times worse than an insulated roof. What matters is that a cold surface overhead is felt more than one beside you, so a room can feel chilly at an air temperature the thermostat is perfectly happy with.
Why it is felt rather than measured
Because people exchange heat with surfaces by radiation as well as with air by convection.
A thermostat measures air temperature. A person standing in a room also radiates heat toward every cold surface around them, and loses warmth doing so.
Which is why a room with a large cold surface feels cooler than the same room at the same air temperature without one.
Why overhead is worse
A specific consequence of a rooflight being above rather than beside.
A person under a cold ceiling surface loses heat upward from the head and shoulders, which is where the sensation of feeling cold registers most strongly.
The same surface in a wall behind a sofa is barely noticed.
How cold the surface actually gets
Several degrees below the surrounding ceiling on a cold night, and more on a poor unit.
A good double glazed unit with a warm edge spacer and a proper thermal break stays reasonably close to room temperature. A single skin plastic dome does not, and neither does a well glazed unit with insulation stopping short of its frame.
The frame is colder than the glass
The part people do not expect, and it is where the discomfort concentrates.
Modern glazing performs better than most frames, so the coldest line in the installation is generally the frame perimeter rather than the middle of the pane.
Which is also why condensation appears there first.
The reveal is colder still, if it is wrong
And this is the part that is entirely within an installer’s control.
Where insulation stops short at the reveal, heat takes the short path around it, and that path runs the whole perimeter of the opening.
Insulation carried right up to the frame is what prevents it, and it is done at installation or not at all.

What the night sky adds
The reason a rooflight is colder than a window of the same specification.
Glass facing the open sky radiates to it, and a clear night sky is effectively far colder than the air. A wall window faces the ground and buildings instead.
The comparison is on does a rooflight lose more heat than a window.
Why it is worst on clear still nights
The combination that produces the effect people notice.
Cloud reflects radiation back, so an overcast night is warmer at the glass than a clear one at the same air temperature. Wind mixes air and moderates the surface too.
A clear, still, cold night is when a rooflight will feel coldest and frost first.
What reduces it
Four things, in order of effect.
Insulation carried to the frame. A frame with a genuine thermal break. Good glazing with a low emissivity coating and a warm edge spacer. And, on a large area, a third pane.
The first is free and the last is expensive, which is the wrong way round from how people usually approach it.
A blind at night
The simplest practical measure and it works.
Closing a blind puts a layer of still air between the room and the cold surface, which reduces both the radiant loss and the draught of cold air falling off the glass.
In a bedroom under a rooflight it makes a noticeable difference to comfort.
The cold draught people describe
Real, and frequently mistaken for a leak.
Air in contact with a cold surface cools, becomes denser and falls, which produces a slow downdraught beneath a rooflight that feels like a draught from outside.
It is not air coming in. It is room air circulating, and better glazing reduces it.

Where it matters most
Rooms where people are still for long periods.
A bedroom, a study, a seating area under a lantern. Somebody sitting under a cold surface for an hour notices what somebody crossing a hallway never will.
Where it barely matters
Hallways, landings, bathrooms and utility rooms. In a space people pass through, the radiant effect has no time to register, and a modest specification is entirely adequate.
Whether it means turning the heating up
Occasionally, and it is worth understanding why.
Compensating for a cold surface by raising the air temperature works and is inefficient, because it raises the temperature of the whole room to fix a local effect.
Fixing the surface is cheaper to run than heating around it.
Underfloor heating and radiant balance
A pairing worth knowing about. A warm floor radiating upward offsets a cold surface overhead rather effectively, which is one reason a kitchen extension with underfloor heating and a large rooflight is frequently comfortable.
Condensation is the same effect
And it is the visible evidence of it.
Water forms first on the coldest surface in a room, which is the rooflight, and where it appears along the frame perimeter it is showing exactly where the heat is escaping.
The remedies are on how do I stop condensation on a rooflight.
What we carry
We carry the insulation right up to the frame and seal the vapour control layer to it as standard, because that single detail does more for comfort under a rooflight than the difference between two good units.
The whole picture is on the energy efficient rooflights page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.