Some products do, and the great majority of walk on installations are fixed. A hinge, a seal and a mechanism carrying a very heavy panel that is also being walked on is a demanding combination, and where an opening is genuinely needed the answer is usually a purpose made access hatch rather than an opening rooflight.
Why most are fixed
Because a floor is not a good place for a moving joint.
An opening panel needs a gasket compressed by a mechanism, and that joint then has people, furniture, grit and standing water on it.
The weight problem
The first obstacle.
A walk on panel is extremely heavy, so any opening version needs assistance to move it and a mechanism rated for that weight, repeatedly.
Why it is so heavy is on how thick is walk on glass.
The seal problem
The second, and the more serious.
A gasket in a trafficked surface collects grit and takes foot traffic, and a seal that cannot compress cleanly is a leak in a detail buried under a terrace.
Why that matters is on do walk on rooflights leak.
The drainage problem
The third.
A flush opening panel interrupts the terrace drainage, and water crossing the surface has to be kept away from the joint rather than allowed to sit in it.
Access hatches
The product that does exist.
Purpose made glazed roof access hatches are manufactured, generally with a raised or a gas strut assisted lid, and they are designed for occasional access rather than for daily ventilation.
What a hatch is for
Getting onto a roof or into a space.
A hatch provides a way up onto a terrace from a stair, or access into a plant area, and it is used a handful of times a year.
Why that changes the design
Because occasional use is a different requirement.
A component opened twice a year can accept a heavier lid, a more deliberate seal and a slower operation than something opened daily.

Sliding rooflights
A different family, and worth knowing about.
Sliding units that run over the adjacent roof exist and give a large clear opening, and they are generally not walk on rated in themselves.
A walk on panel beside a hatch
The arrangement that usually works.
Fixed walk on panels for light and a separate purpose made hatch for access does each job properly rather than asking one component to do both.
Ventilation instead
Almost always better provided elsewhere.
Where the room below needs air, an opening rooflight in a part of the roof that is not walked on, or a wall opening, is far simpler.
What that involves is on is an opening rooflight worth it on a flat roof.
Escape from below
A requirement that occasionally arises. Where a basement needs a means of escape, that is a designed provision with stated dimensions rather than a rooflight that happens to open.
The requirement is on how wide does an escape rooflight need to be.
Smoke ventilation
A different specification again. Certified smoke vents exist in walk on configurations for basements and stairwells, and they are specified from a fire strategy rather than chosen.
That is on can a rooflight be a smoke vent.
Powered operation
Where an opening walk on unit exists, generally yes.
The weight makes manual operation impractical on anything but a small hatch, so powered operation with an actuator sized to the panel is the norm.
What one is is on what is a chain actuator.
Where the cable goes
Under the terrace, and it is planned early.
A supply to a hatch has to be run before the terrace build up goes down, because afterwards it is under paving and insulation.
Safety when open
An open hole in a floor. An opening panel in a terrace leaves an aperture somebody can fall into, so guarding while it is open is part of the design rather than a caution.

What it costs
A large step over a fixed panel.
A mechanism, a heavier frame, a seal arrangement and a supply put an opening walk on unit into a different bracket entirely.
Where that sits is on how much does a walk on rooflight cost.
What it costs in maintenance
More than a fixed panel, which asks for almost nothing.
Seals, drainage and a mechanism all want periodic attention, where a fixed walk on panel wants cleaning and nothing else.
Retro fitting an opening version
Not realistically.
The frame, the structure and the drainage all differ, so this is a decision made at design rather than one that can be revisited.
Where a fixed panel is obviously right
Almost every domestic terrace.
Where the requirement is light into a basement and a usable terrace above, a fixed panel does exactly that with nothing to go wrong.
A hinged panel in a small hatch
Where the weight becomes manageable. A modest hatch sized for a person to climb through carries a panel light enough for gas struts to assist, which is why hatches exist and large opening panels largely do not.
The upstand on a hatch
Usually raised rather than flush.
A hatch generally sits on a visible upstand so the seal is well above the terrace surface, which is a sensible compromise between weathering and appearance.
Where a hatch lands inside
Over a stair or a fixed ladder.
Access from below means something to climb, and where that goes and how it is guarded is part of the design rather than an afterthought.
What we ask first on walk on glass
We ask what the opening is actually for, because if the answer is access we specify a hatch and if it is air we put the opening somewhere nobody stands.
The whole picture is on the walk on rooflight installation page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.