There are two separate guarantees on a roof window installation and they cover different things. Confusing them is why people are surprised when a claim goes nowhere. This page sets out the structure of each so you know which one you are looking at.
The terms of any manufacturer guarantee are set by the manufacturer, they change over time, and they are stated in the document supplied with your window. What follows describes how these guarantees are generally built rather than reciting terms that may have moved.
The two guarantees
| Manufacturer product guarantee | Installer workmanship guarantee | |
|---|---|---|
| Given by | The company that made the window | The company that fitted it |
| Covers | Defects in the product itself | The quality of the installation |
| Typical claim | A sealed unit that has failed early | A leak at the flashing or a collar |
| Does not cover | How it was fitted | A manufacturing defect in the unit |
| Depends on | The product being installed correctly | The installer still being in business |
Almost every dispute in this area comes from a fault that sits on the line between the two, which is why the distinction is worth understanding before you need it.
What a product guarantee is for
A manufacturer guarantee covers the window as manufactured: that the materials and the assembly are free of defects, and that the product performs as specified for a stated period.
The characteristic claim is a sealed unit that mists prematurely, a frame that has failed in a way that is not attributable to fitting or to damage, or a component that has failed within its expected life.
Different parts of a window frequently carry different periods. The glazed unit, the frame and the electrical components on a powered window are commonly guaranteed for different lengths of time, and reading the document rather than assuming one figure covers everything is the whole of the advice here.
What a product guarantee generally excludes
The exclusions are more consistent between manufacturers than the periods are, and they are the part worth knowing.
- Incorrect installation. A product guarantee assumes the product was fitted to the manufacturer instructions with its own components.
- Wear items. Gaskets, seals, filters and finishes are consumable and age with use.
- Accidental or impact damage. Something arriving on the roof is not a manufacturing defect.
- Lack of maintenance. Where a product needs occasional attention and never got it.
- Consequential loss. Guarantees generally cover the product rather than the redecoration underneath it.
- Modification. Anything altered, or fitted with a third party component in place of the maker’s own.
The exclusion that matters most
Incorrect installation is the one that ends most claims, and it is worth being direct about it.
A product guarantee is a promise about the window, and it is conditional on the window having been given a fair chance. A unit fitted with the wrong flashing kit for the covering, without an underlay collar, into an opening that is out of square, is a unit that is being asked to perform outside the conditions the guarantee assumes.
When such a window leaks, the manufacturer is not at fault and says so. The homeowner then discovers that the installation is the thing they needed a guarantee on, and that is a different document.

Using the manufacturer’s own components
This follows from the same principle and it is worth stating separately.
The flashing kit, the underlay collar and the insulation collar supplied for a given window are part of the system the manufacturer tested. Substituting a generic component, or improvising a detail in sealant, takes the installation outside that system.
It also, in practice, works less well. The components exist because the junction is difficult, and the reason we order them with the window is not primarily the guarantee.
Registration
Some manufacturers ask for a product to be registered after installation, sometimes to activate an extended period beyond the standard one.
Where that applies it is a few minutes of work and it is easy to not do. Whoever ends up owning the house in ten years will care about it a great deal more than anybody does on the day.
We leave the documentation, the data plate reference and any registration instruction with the completion paperwork rather than assuming somebody will find it in the packaging.
What our workmanship guarantee covers
Ten years on the workmanship, on the installations we carry out. It is not insurance backed, and we say so plainly rather than implying a protection that is not there.
What it covers is our work: the opening, the trimming, the kerb or the trimmers, the flashing, the collars, the reinstatement of the covering, and the weathertightness of the junction we made.
What it does not cover is a manufacturing defect in the unit, which is the manufacturer’s, or a pre-existing condition elsewhere on a roof that we did not touch.
Not insurance backed, and what that means
An insurance backed guarantee is a policy that pays out if the company that gave the guarantee ceases to trade. Ours is not one, and it is better to know that than to discover it.
A workmanship guarantee from any installer is worth exactly what the company behind it is worth, which is why the length of the guarantee matters less than whether the firm will still be there. A ten year guarantee from a business trading for twenty five years is a different proposition from a twenty five year guarantee from one trading for two.

Your statutory rights sit underneath both
Guarantees are given voluntarily and they sit on top of consumer law rather than replacing it.
Under the Consumer Rights Act 2015, goods supplied to a consumer must be of satisfactory quality, fit for purpose and as described, and services must be carried out with reasonable care and skill. Those rights exist whether or not a guarantee is offered, and a guarantee cannot reduce them.
Nothing on this page, and nothing in any guarantee document, takes those away. Where a dispute is genuinely serious, those rights are frequently the stronger position.
Where the line falls in practice
Three common situations, and which guarantee applies.
A misted unit at year six
An edge seal has failed early. That is a product matter, and the manufacturer guarantee is the route, provided the installation was correct.
A leak in driving rain from one direction
That is the signature of a missing underlay collar, which is an installation matter. Nothing in a product guarantee covers it and it is squarely a workmanship question.
Condensation on the reveal every winter
That is a cold bridge where insulation was not carried up to the frame. Also installation, and also not a product defect. It is also frequently blamed on the window for years.
Guarantees do not transfer automatically
A point that surfaces at exactly the wrong moment, which is during a sale.
Manufacturer product guarantees are frequently attached to the product and pass with the building, and installer workmanship guarantees frequently are not. Many are given to the person who paid for the work and end when the house changes hands, and some transfer once on application.
If you are buying a house with recent roof window work, the question to ask is not whether there is a guarantee but whether it transfers to you and on what terms. If you are selling, having the paperwork together is worth more than the guarantee itself, because it is the evidence the work was done properly.
What “lifetime” and long periods actually mean
Long guarantee periods are used in marketing across this trade and they deserve a sceptical read.
The period is only ever as good as the exclusions attached to it and the company standing behind it. A very long guarantee with broad exclusions on wear items, finishes and installation may cover less in practice than a shorter one with narrow exclusions.
Read what is excluded before you read the number. On any guarantee, the exclusions are the document and the headline period is the advertisement.
The gap nobody thinks about
There is a category of fault that neither guarantee covers, and it is worth naming.
Where a rooflight was correctly made and correctly fitted, but the roof around it was already at the end of its life, water arriving through the covering nearby is not a product defect and not a workmanship defect. It is a roof that needed replacing.
That is why we say plainly at survey when a covering is near the end of its life, and why putting a new unit into a roof that needs recovering in two years is work done in the wrong order. Saying it before the job is the only way to avoid the argument after it.

What to keep
- The manufacturer documentation, with the type and size code.
- Any registration confirmation.
- The installer’s written guarantee, with the date and what it covers.
- The invoice, which is what evidences the date and the parties.
- The Building Control completion certificate where the work was notifiable.
- Photographs of the installation before the covering went back on, if you have them.
The last one is the most useful and the least common. We take them as a matter of course, because the collar and the insulation detail are unphotographable afterwards and they are exactly what a later dispute turns on.
Building Control is not a guarantee
A completion certificate confirms the work was inspected and found to comply with the Building Regulations. It is not a warranty on the workmanship and it does not make anybody liable for a leak.
It matters for a different reason: it is the document a buyer’s solicitor asks for when the house is sold, and its absence on notifiable work is a real problem at that point.
Making a claim without wasting time
Whichever route applies, the same preparation helps.
Establish what the symptom actually is and in what weather. Photograph it. Find the data plate and the installation date. Say plainly what happened and when, in order. And approach the right party first, because a product claim sent to the installer and an installation claim sent to the manufacturer both come back with nothing.
What we fit on a VELUX
We fit the manufacturer’s own flashing kit, underlay collar and insulation collar, to the manufacturer instructions, so the product guarantee is intact rather than compromised. We leave the documentation and the photographs with you. And we give a ten year workmanship guarantee on our own work, and say clearly that it is not insurance backed.
Where a fault turns out to be the product rather than our work, we will identify it as such and help you make the claim rather than leaving you to argue it alone. That is not covered by any guarantee document and it is the part that actually matters when something goes wrong five years after the invoice.
A guarantee is only as useful as knowing which one you are holding.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.