The rooms that most need daylight are frequently the ones with nothing above them. An internal hallway, a landing, a windowless cloakroom under a first floor: none of them has a roof of its own, and the question is whether a tunnel can reach them from somewhere that does.
The geometry of the problem
A sun tunnel needs a dome on a roof and a diffuser in a ceiling, connected by a tube through a space.
Where the room is directly under a roof, the tube goes straight down and everything is easy. Where it is not, the tube has to travel sideways through a roof space to get from a roof position to a ceiling position, and every metre of that and every change of direction costs light.
So the question is not whether it can be done but whether enough light survives the journey.
The rooms this is about
| Room | What is above it | Prospect |
|---|---|---|
| Bungalow inner hallway | Roof space | Excellent. Short sideways run |
| Top floor landing | Roof space | Good |
| Stairwell rising to the top | Roof space at the head | Good, and a long drop |
| Ground floor hall in a house | A first floor room | Difficult. No route |
| Cloakroom under stairs | Stairs and a floor | Rarely possible |
| Middle floor of a flat | Another flat | Not available |
The pattern is simple: if there is a roof space between the ceiling and a roof, there is a route. If there is a habitable room, there is not.
The sideways run
How it is actually done, and it is more capable than people assume.
The dome goes on the nearest workable roof position and the tube travels across the roof space to sit over the ceiling opening. With rigid tube that means two elbows: one at the top turning the run sideways, one at the bottom turning it down.
Two shallow elbows and a short traverse is a perfectly good installation. Two sharp elbows and a long traverse is a tunnel that arrives dim.
What the offset costs
Worth being concrete about the trade, because it decides whether to bother.
Light falls away with run length and it falls away in steps at each bend. A run offset by a small distance, with two shallow elbows, loses noticeably less than one offset across a whole roof with two sharp ones.
Which means the useful design objective is to minimise the offset rather than to accept it. Moving the dome position toward the room, even onto a less convenient slope, buys light directly.

Choosing the roof position
The decision that makes the difference, and it is made on the roof rather than in the room.
- Find the ceiling position the room wants.
- Look directly above it. Is there a workable roof position?
- If not, find the nearest one that is clear of structure, obstructions and any valley or hip.
- Check the route between the two for purlins, tanks, services and trusses.
- Take the position that gives the straightest, shortest run, not the one that is most convenient externally.
- Check what the dome will look like from outside in that position.
The dome has to go somewhere sensible too
A constraint that occasionally overrides the light calculation.
A dome is a small object on a roof and it is visible. On a rear slope it is unremarkable. On a front slope in a conservation area it is a planning matter, and on a listed building it is a consent matter regardless of size.
Which means the ideal roof position for the light is sometimes not available, and the design becomes a compromise between the shortest run and the least visible dome. That is worth establishing before promising a result.
Stairwells, which are the best case
Worth separating because it is the most rewarding installation of all.
A stairwell rising to the top floor of a house has a roof space directly above and a tall open volume below. A tunnel at the head of it delivers light down through several storeys of circulation space.
The run is short and straight, the space below is normally lit only artificially, and the effect is dramatic because light falls through the whole stairwell rather than into one room.
It is one of the most transformative positions available and it is frequently overlooked, because people think about rooms rather than circulation.
Landings
The other circulation space, and the same argument in miniature.
A top floor landing with no window is a permanently lit space in the middle of a house. A tunnel above it is a short straight run into a small area, which is exactly the geometry this product is best at.
It also lights the doors off it, which changes how the whole upper floor reads rather than just the landing.
Inner rooms in a bungalow
The most common version of this problem on our patch, and the easiest.
A bungalow puts every room on one level, so the ones in the middle of the plan have no external wall. They all have a shallow roof space directly above with a short route to the roof.
Which means a sideways run in a bungalow is usually a modest offset rather than a journey, and the results are correspondingly good. It has its own page.
What cannot be done
Worth being plain, because it saves a survey visit.
A tunnel cannot pass through a habitable room. There is no way to get from a roof, through a bedroom, to a hall below it, and no product that does.
Which means a ground floor room in a two storey house is generally not a sun tunnel proposition unless there is a single storey element above part of it: a flat roofed extension, a porch, or a rear addition.

The single storey element, which is the way in
The exception worth looking for, and it is the answer more often than people expect.
A great many houses have a single storey element somewhere: a rear extension, a side addition, a garage link, a porch. Any of those has a roof directly above ground floor ceiling level.
Where the dark room adjoins one, a tunnel from that roof, offset sideways under the ceiling, can reach it. It is a longer run than the ideal and it is available where nothing else is.
Voids and cupboards
The other route worth looking for on a middle floor.
Occasionally a run can be taken through a built in cupboard, a boxed service void, or the corner of a room above where a boxing can be formed. It is intrusive, it consumes space in the room above, and it is sometimes acceptable.
It is a considered intervention rather than a standard installation, and whether it is worth it depends entirely on how much the dark room matters.
How much light a hallway actually needs
The reassuring part, and it changes the calculation.
A hallway is a circulation space rather than a room somebody works in. It does not need the light level a kitchen does; it needs enough to feel lit and to connect to the time of day.
Which means a hallway tolerates a longer or more offset run than a room where somebody reads would. A tunnel that would be marginal over a study is entirely satisfactory over a hall.
Two tunnels in a long hall
Worth considering, because a long narrow space lit from one point has a bright patch and dark ends.
Two smaller tunnels spaced along a hallway distribute light far more evenly than one larger one in the middle, and each has its own shorter run to its own roof position.
It costs two roof penetrations and two ceiling openings. In a long hall it is frequently the better answer and it is rarely offered.
Decoration does a surprising amount
The free improvement in exactly this kind of space.
A hallway lit only by a tunnel depends on its surfaces to spread what arrives. Pale walls, a light floor and a white ceiling return most of it; a dark hall absorbs it.
In a windowless circulation space that effect is substantial, and it is worth mentioning because people decorate after rather than before.

Doors, and the room beyond
A small point that changes how far the benefit reaches.
Light arriving in a hallway spills through open doors into the rooms off it, and a glazed door or a fanlight carries it further. In a house where the hall was the dark heart of the plan, lighting it changes several rooms rather than one.
Where a door is being replaced anyway, a glazed panel next to a newly lit hall is worth more than it was before.
What to establish at survey
Five things, and they decide the whole job.
- Is there a roof space above the ceiling, or a habitable room?
- Where does the room want the diffuser?
- What is the nearest workable roof position, and how far is the offset?
- What is in the way: purlins, tanks, trusses, services?
- Is the roof position acceptable externally, given any designation?
Getting into the roof space to look
The practical first step, and on some of these houses it is the difficulty.
A survey for this product is a survey of a roof space rather than a roof: the depth available, the structure, the obstructions, and whether a run can physically be assembled in there. That needs a hatch and somewhere to stand.
Where a roof space is shallow, boarded over, or reachable only through a small hatch at the far end, the survey is harder and the installation is harder for the same reasons. It is worth knowing that at the outset rather than on the day.
What a dome looks like from the ground
Worth setting expectations about, because people picture something larger.
A sun tunnel dome is a small circle on a roof, considerably smaller than any rooflight, and from ground level it is an unobtrusive object. On a tiled roof, at a normal viewing distance, most people do not notice one.
Low profile and flat glazed versions exist which are less conspicuous again, and they are worth specifying where the roof position is visible or where a designation applies. They collect slightly differently from a raised dome, which is a trade worth discussing rather than assuming.
How we go about it
We go into the roof space first, because the route decides whether this is possible before anything else is discussed. We choose the roof position for the shortest straightest run rather than for convenience, look for a single storey element where the obvious route does not exist, and say plainly when there is no route at all.
A room with no roof of its own can frequently still be reached. What decides it is what sits between the ceiling and the sky.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.