It can, and a lantern is more exposed to it than any other rooflight because it faces several directions at once. There is no such thing as a north facing lantern; every one of them has a face pointing at the afternoon sun. That is why solar control glass is a normal specification on a lantern rather than an upgrade.
How overheating works generally
Solar gain, the g value and what glass does about it are set out on will a rooflight make my room too hot.
What follows is what is specific to a structure with faces in every direction.
Why orientation does not help you
The point that distinguishes a lantern.
A flat rooflight or a roof window has one orientation, and a north facing one collects very little direct sun. A lantern has an east face, a west face and a south face whatever the house does.
So the specification cannot be relaxed because of where the extension is.
The area problem again
More glass than the opening it covers.
The sloping faces give a larger glazed area than the hole in the roof, so a lantern admits more energy than a flat pane over the same opening.
What the afternoon does
The part people actually complain about.
A west facing face takes low late sun almost square on, which is why a kitchen that is comfortable at midday becomes uncomfortable at five o’clock in July.
Solar control glass
The first and most effective answer.
A coating on the outer pane reflects and absorbs a large part of the solar energy before it enters, while letting most of the visible light through.
What it is is on what is solar control glass.
Why it is not a tint
A common misunderstanding.
A modern solar control coating is largely neutral to look through, and the room stays bright. It is selective rather than dark.

What the g value tells you
How much of the sun’s energy gets through.
A lower figure means less heat entering, and on a lantern it is the number worth asking about rather than the U value alone.
What it means is on what is a g value.
Balancing it against winter
The trade off that is real and usually worth making.
Solar control glass also blocks some winter gain, and in a British climate the summer discomfort is generally the problem worth solving.
Adding it later
Not really, and this is why the decision matters.
The coating is within the sealed unit, so it is specified at order or the panes are replaced, and applied films are a poor substitute overhead.
The position is on can you add solar control to an existing rooflight.
An opening pane
The second most effective measure, and it works differently.
Glass reduces what comes in. An opening lets what has arrived get out, at the highest point of the room where the hot air has collected.
What is available is on can a roof lantern be opened.
Cross ventilation
What makes the opening work.
An opening at the top with doors or a window open at a low level sets up a flow, and the room clears rather than stirring.
Opening automatically
Where a kitchen genuinely benefits.
A pane set to open when the room passes a temperature deals with a hot afternoon in an empty house, which is exactly when nobody is there to open it.
That is on can a rooflight open automatically on temperature.
Blinds
Helpful, and less than people hope.
An internal blind sits behind the glass, so the energy is already in the room, and the fabric then radiates it. It cuts glare well and heat only modestly.
Why is on do blinds reduce heat through a rooflight.
External shading
Effective and rarely practical on a lantern.
Shading outside the glass stops the energy before it arrives, which is the right principle, but a lantern standing above a roof is an awkward thing to shade.

What the room can do
Thermal mass and airflow.
A tiled or stone floor absorbs heat through the day and releases it slowly, which flattens the peak, and it works with ventilation rather than instead of it.
Where the size decision comes in
The measure nobody wants to hear.
A smaller lantern with excellent glass will be more comfortable than a very large one with ordinary glass, and the light difference is smaller than people expect.
Sizing is on how big can a roof lantern be.
Where the regulations come in
Overheating is assessed on new work.
Building regulations now consider the risk of overheating in new dwellings, and glazed area, orientation and ventilation are all part of that assessment.
What we would specify
Solar control glass and an opening pane, on any lantern over a kitchen.
Those two together deal with the problem, and neither can be added conveniently afterwards.
The night before, and the morning after
The pattern in a room that overheats.
Heat gained through a day is released slowly into the evening, so a kitchen under a lantern is often at its most uncomfortable after the sun has gone rather than at noon.
Night ventilation through an opening pane is what clears it before the next day starts.
Where a fan or a unit is the answer
Occasionally, and it is worth saying plainly.
Where a room has an unavoidably large glazed area facing south west, mechanical cooling may be the honest answer rather than a further specification change to the glass.
It is better decided at design than discovered in July.
How we quote it on a lantern
We quote solar control as standard on a lantern rather than as an option, because there is no orientation that avoids the afternoon sun on a structure with faces pointing every way.
The whole picture is on the roof lantern installation page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.