That depends entirely on what is specified, and it is worth deciding deliberately. Clear walk on glass gives a view of the sky from below and a view down into the room from above, including a clear view of anybody standing on it. A ceramic frit or an obscured interlayer keeps almost all of the light while removing the view in both directions.
Why it comes up
Because a terrace is used by people.
Somebody standing on a clear panel is visible from beneath, and somebody in the room below is visible from the terrace, and both of those surprise people.
What clear glass gives you
The most light and the least privacy.
A clear panel is the brightest specification and gives a genuine view of the sky from the room below, which on a basement is a real quality.
Where clear is right
Where nobody stands on it often. A panel in a walkway, a light well or a part of a terrace that is crossed rather than occupied is a good candidate for clear glass.
Where clear is wrong
A seating area over a kitchen. Where people will sit, stand and eat on the panel, and where somebody works beneath it, clear glass produces exactly the awkwardness you would expect.
A ceramic frit
The usual answer, and it does two jobs.
The same fired pattern that provides slip resistance also breaks up the view, so the anti slip specification is frequently the privacy specification as well.
How it works is on is walk on glass slippery when wet.
How much a frit obscures
Depends on the coverage. A light dot pattern breaks up detail while leaving a sense of sky. A dense pattern reads as translucent and removes the view entirely.
An obscured interlayer
The other route, and it is even.
A translucent interlayer within the laminate diffuses light across the whole panel rather than in a pattern, giving an even soft light and no view.

Which looks better from below
A matter of taste and worth seeing.
A frit reads as a pattern against the sky. An obscured interlayer reads as a panel of light, and people have strong preferences between the two.
How much light is lost
Less than people expect. Obscuring diffuses light rather than blocking it, so the room stays bright and what goes is the view rather than the illumination.
What is lost with the view
The sky, and it is a real loss.
A clear panel gives a basement a connection to the weather and the time of day that an obscured one does not, which is why it is worth a proper decision.
A compromise
Frit density chosen carefully. A moderate pattern removes the detail of what is above while leaving light, colour and a sense of cloud movement, which is often the best answer.
Looking up at feet
The specific thing people mind. The underside of a shoe on clear glass is unattractive and unmistakable, and it is the single most common reason a frit gets specified.
Looking down into the room
The other direction, and it matters less.
The room below is usually darker than the terrace, so the view down is weaker than the view up, except at night with the lights on.
At night
The relationship reverses. A lit room under a clear panel becomes the bright side, so the room is visible from the terrace and light spills upward across it.
Dirt on a clear panel
More visible than on a fritted one.
Every mark shows on clear glass viewed against the sky, where a pattern disguises a good deal, which is a practical argument for a frit.
What cleaning involves is on how do you clean a walk on rooflight.
Scratching on the sacrificial layer
Also more visible when clear. Years of grit underfoot mark the top surface, and on a clear panel that reads against the sky where a textured surface hides it.

Solar gain through it
Reduced by obscuring. A dense frit cuts solar transmission as well as visibility, which on a south facing terrace over a room is a useful side effect.
The general point is on what is solar control glass.
Whether it can be changed later
Not without a new panel.
Fired frit and laminated interlayers are inside the assembly, so the decision is made at order and lives with the installation.
Applied films
Not a solution here.
A film on the walking surface will not survive foot traffic, and one on the underside is awkward to apply and to keep clean.
Seeing a sample
Worth insisting on. Frit patterns look different at full size, viewed from below, against the sky, and a sample settles a decision that cannot be revisited.
Mixing clear and obscured panels
Sensible where a terrace has more than one.
A clear panel over a hallway and an obscured one over a seating area is a reasonable specification, provided the frames and the frit style are consistent enough to read as a set.
What the room below is for
The question that usually settles it. A bathroom or a bedroom under a terrace wants obscuring without any further discussion. A hallway, a stair or a store rarely does.
Blinds beneath it
Occasionally the answer, and awkward. A blind under a walk on panel gives control over privacy and light, and it has to be fitted to the ceiling around the opening rather than to the unit.
What we want to know on walk on glass
We ask what the panel will be stood on for before recommending clear glass, because the privacy decision and the slip decision are usually the same decision and it is made once.
The whole picture is on the walk on rooflight installation page.
Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.