Roof Window Installation

How much does a roof window cost to install?

On a pitched roof the covering and the access move the number more than the window does. A standard unit into a concrete tiled rear slope reached from a tower is the cheapest case. The same unit into a Victorian slate roof needing a scaffold, matched salvaged slate and careful reinstatement is a different job at the same product price.

Where the general drivers are set out

The pricing method, what is itemised, and why quotes differ, apply to every rooflight and are on how much does a flat roof rooflight cost.

This page is the three things that are specific to a window in a pitched covering.

The covering, which is the largest variable

Concrete interlocking tile is the cheapest to work in. Clay plain tile is next. Slate costs more, and hand made tile or stone costs considerably more again.

The difference is time and care rather than materials: a covering that has to be lifted, set aside and reinstated to a varying gauge takes hours a machine made tile does not.

Why slate costs more

Three reasons compounding.

It cannot be walked on, so access is a scaffold rather than a tower. Removing slates without breaking them is slow. And matching salvaged slate has to be sourced before the job starts.

The detail is on can you fit a roof window to a slate roof.

Why stone costs more again

Because no preformed kit fits and the weathering is made up in lead by hand.

That is a specialist leadworker for a day rather than a kit fitted in an hour, and on a graded stone roof the units set aside are effectively irreplaceable.

Access on a pitched roof

The second largest variable, and it is decided by the storey rather than the room.

A single storey rear slope reaches from a tower. A second floor loft slope needs a scaffold, and on a terrace with no side access that scaffold stands on the highway with a licence.

It is quoted as its own line rather than absorbed.

A roof window set into a natural slate slope seen from inside a loft room, the plastered reveal splayed outward, bare floorboards and white walls
The structural work

The structural work

The third, and it depends on what is holding the roof up.

A unit fitted between trusses needs framing within the bay, which is modest carpentry. A wider unit in a cut roof means trimming a rafter, which is a designed detail.

Cutting a truss is a structural design and a different order of cost entirely.

Where the purlin is

A cost driver on a cut roof that is invisible from outside.

Where a purlin crosses the wanted position, the window moves or the opening becomes a structural job. Moving it is free; the alternative is not.

It is established from inside the roof at survey.

The flashing kit

A modest line and it is not optional.

The kit is ordered against the covering profile and the window size, and on a replacement a new kit is included as a matter of course rather than reusing an old one.

Escape rated units

Where the product cost rises for a regulatory reason.

Where a loft room is a bedroom, one window has to satisfy the escape dimensions, which generally means a top hung unit in a particular size rather than the cheapest option.

It is settled before ordering, and it is on can a roof window be an escape window.

Making good a sloping reveal

More work than a flat ceiling patch.

A roof window reveal is a non-rectangular void, deeper at the head than the sill, and splaying it properly is a plastering job that repays itself in light.

The junction of a roof window and a Sussex clay peg tile slope, apron flashing dressed over the tiles below the frame, seen close and square on
As part of a loft conversion

As part of a loft conversion

Where the marginal cost of each window is low.

The scaffold is up, the structure is being altered anyway, and the insulation and ceiling are being formed around the openings rather than cut into.

Which is why windows added during a conversion cost a fraction of the same units retrofitted later.

During a re-roof

The other cheap moment, and it applies to any pitched roof.

Where a roof is being stripped and relaid, the covering is off and the battens are being replaced, so forming an opening and dressing a kit into it is a small addition.

Where a re-roof is planned within a couple of years, we will say to wait.

Two windows on one slope

Less than twice one, and the saving is in the access.

The scaffold, the set up and the covering work at the perimeter are shared, so the second opening adds the forming, the unit and the making good.

A conservation unit

More for the product and the same for most of the installation.

Where the covering is hand made tile or stone, the installation dominates and the premium on the unit is proportionally small.

The comparison is on are conservation rooflights more expensive.

What we find on opening up

The line that cannot be priced in advance on an old roof.

A rafter foot decayed at the wall plate, a purlin end soft, or no underlay at all where a collar was meant to tie in.

We price the known work and state clearly what would be extra.

What we identify on a pitched roof

We identify the covering and the structure at survey and price the access separately, because on a pitched roof those two account for most of the difference between one job and another.

The method is on the how we price and quote page.

Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.

Get a fixed quote

Get a fixed quote

Tell us about the roof. We will tell you the price.

A survey costs you nothing and there is no obligation attached to it. We look at the roof build-up, the exposure and the opening, and give you one fixed figure, not an estimate that moves once work starts.

If your rooflight is leaking now, say so and we will prioritise the survey.

  • Fixed price, confirmed in writing
  • 10-year workmanship guarantee
  • Installed to current Building Regulations
  • Your roof is never left open overnight
Call Get a fixed quote