Energy Efficient Rooflights

What is solar control glass?

Solar control glass carries a microscopically thin metallic coating on an internal surface of the sealed unit, which reflects a large part of the sun’s infrared energy while letting most of the visible light through. It cuts summer heat gain substantially without making a room noticeably darker, which a tint cannot do.

How the coating works

By being selective about wavelength rather than simply reducing everything.

Sunlight arrives as visible light and as infrared, and most of the heat is in the infrared. A solar control coating reflects a disproportionate share of the infrared while passing the visible.

Which is why a good one can remove half the heat and only a fifth of the light.

Against a tint

The distinction that matters, because the two are frequently confused.

A body tinted glass absorbs energy across the spectrum, darkening the room roughly in proportion to the heat it removes, and re-radiating some of what it absorbs inward.

A coating reflects rather than absorbs, so more of the rejected energy goes back outside rather than warming the room secondhand.

Where the coating sits

On an internal face of the sealed unit, protected by the cavity.

Which is why it cannot be scratched off in cleaning, why it cannot be added to an existing unit without replacing the glass, and why it lasts the life of the unit.

What can be retrofitted instead is on can you add solar control to an existing rooflight.

What it does to the numbers

It lowers the g-value substantially and the light transmission modestly.

A clear double glazed unit might sit around 0.6 for solar transmittance; a solar control one well below half that. Light transmission falls too, by considerably less.

What the g-value is is on what is a g-value.

What it looks like

Faintly, and it is worth knowing before it arrives.

Solar control coatings carry a slight tint in reflection, generally blue or neutral grey depending on the product, visible from outside at some angles.

From inside the room the effect on colour is slight. It is worth looking at a sample rather than assuming it is invisible.

A vapour control membrane carried up the inside face of a rooflight kerb and taped to the frame, the tape line clearly visible, construction in progress
The winter cost

The winter cost

The part nobody mentions when selling it, and it is real.

The coating cannot tell which month it is, so it rejects useful solar gain in December as efficiently as unwanted gain in July.

Which is why it belongs on units that genuinely overheat rather than as a default specification.

Where it belongs

South and west facing units over habitable rooms, and flat roof glazing in particular.

A flat roof unit takes summer sun close to square on, which is the worst case, and a kitchen extension under one is the room we are most often asked to fix.

Where it does not

North facing units, and rooms nobody occupies for long.

A north facing rooflight takes almost no direct sun, so a solar control coating removes useful light and prevents nothing. A hallway or a landing is a similar case.

We will not specify it there.

East facing units

The case in between, and it usually does not need it.

Morning sun is at a lower angle and arrives when a room is at its coolest, so an east facing unit rarely produces the afternoon discomfort that drives these enquiries.

Combining it with low emissivity

A question that comes up and has a straightforward answer.

Modern glass can carry both a low emissivity coating for heat retention and solar control properties in the same unit, and most solar control products already do.

So specifying solar control does not mean giving up thermal performance.

Whether it stops overheating on its own

No, and this is where it is oversold.

Glass rejects some of the energy arriving. Whether a room overheats also depends on ventilation, on the mass of the room, and on how much glass there is relative to the floor.

What actually decides it is on will a rooflight make my room too hot.

Against a blind

A different mechanism, and position decides which wins.

Glass rejects energy before it enters. An internal blind stops light after the energy is inside and re-radiates much of it into the room.

An external blind is a different matter, and the comparison is on do blinds reduce heat through a rooflight.

A tape measure stretched corner to corner across the diagonal of a timber rooflight kerb on a flat roof, checking it for square, no hands in frame
Cost

Cost

A modest addition to the unit price rather than a different product class.

It is specified at order and costs a fraction of what retrofitting a solution afterwards does, which is the strongest argument for deciding it properly at the outset.

Self cleaning and solar control together

Available and worth knowing about. The two coatings sit on different faces of the unit and are frequently combined, so specifying one does not preclude the other.

What self cleaning glass does is on what is self cleaning glass.

On a conservation unit

Entirely available, and the two requirements are independent.

The appearance requirement is about the frame and the profile. The glass specification is a separate decision, so a conservation unit can carry solar control glass without any conflict.

Neutral, blue and bronze products

A choice within the family, and it affects appearance rather than performance.

Coatings are made in neutral, blue and occasionally bronze reflective tones, and on a roof seen from below the neutral products generally read best because they change the colour of the sky least.

From outside the reflection is more visible than from inside, which on a slope overlooked from higher ground is worth a thought.

Thermal stress in a partly shaded pane

A technical consideration for the manufacturer rather than the customer, and worth knowing exists.

Solar control glass absorbs more energy than clear glass, and where a pane is partly shaded by a frame, a chimney or a tree, the temperature difference across it can be substantial.

Which is why solar control panes are frequently toughened as standard, and why the specification is left to the manufacturer rather than assembled by anybody else.

What we always specify on the glazing

We specify solar control by aspect, on south and west facing units over rooms people occupy, and we say plainly where it would remove winter light for no summer benefit.

The whole picture is on the energy efficient rooflights page.

Thinking about this job? We survey across Worthing, West Sussex and the South Downs and give you a fixed price before any work starts, with a 10-year workmanship guarantee.

Get a fixed quote

Get a fixed quote

Tell us about the roof. We will tell you the price.

A survey costs you nothing and there is no obligation attached to it. We look at the roof build-up, the exposure and the opening, and give you one fixed figure, not an estimate that moves once work starts.

If your rooflight is leaking now, say so and we will prioritise the survey.

  • Fixed price, confirmed in writing
  • 10-year workmanship guarantee
  • Installed to current Building Regulations
  • Your roof is never left open overnight
Call Get a fixed quote